Table of Contents
Advertisement
Install the Philips Songbird software
again (after the first installation)
Important!
The Philips Songbird software installer is
preloaded to CAM.
To free memory capacity for your media
content on CAM, the installer file is
automatically deleted during the first
installation process.
If you want to install the software any time
after the first installation, follow these
instructions:
1
Connect CAM to the computer.
2
Ensure that the computer is connected
to the Internet, and then open Windows
Explorer.
3
In Windows Explorer, right click on CAM,
and then select the option to install
Philips Songbird.
The computer downloads the installer
»
file from the Internet.
4
Follow the on-screen instructions to
complete the installation.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100%
75%
50%
»
A flashing battery screen indicates
that the battery is low. The player
saves all settings and switches off
within 60 seconds.
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and increase
the play time of CAM if you ensure that the
shortest timer setting is selected. (To check/
adjust the timer settings, set the mode selector
and then select [Display Settings] >
to
[Backlight timer].
Software loaded on the CAM
CAM comes with the following software:
•
Philips Songbird (helps you update the
firmware of CAM and transfer your
media files).
Files loaded on the CAM
The following files are loaded on CAM:
•
User Manual
•
Frequently Asked Questions
25%
0%
EN
9
Advertisement
Table of Contents
