Connecting The Power Cord - Nvidia Quadro PLEX 7000 User Manual

03 00
1
2
3
4
5
6
HArDWAre INSTAll ATIoN AND CoNNeCTIoNS

Connecting the Power Cord

Connect the power cord to the NVIDIA Quadro plex 7000 by opening
the rear louvered cover to expose the power plug.
Close the louvered cover.
plug the power cord from the NVIDIA Quadro plex 7000 to an
AC outlet (it is recommended to use a power-surge protected
outlet). The Quadro plex 7000 requires the input power within
the following ranges:
110-127 Vac, 50/60Hz, 11A
200-240 Vax, 50/60Hz, 5.5A
reconnect the power cord to your host system.
power on the host system.
At this time, power is also applied to the NVIDIA Quadro plex 7000.
Click Cancel when the Found New Hardware Wizard window displays.
You are now ready to install the graphic drivers. Go to Driver
Installation Section and begin the driver installation.
.
16