Unpacking Instructions; Safety Precautions - Planar PXL2230MW User Manual

Unpacking Instructions

 Move the LED LCD monitor out of the package and take off the plastic bag and Polystyrene Foam.
 Pull the base from Parallel versus Panel to Vertical.
 Adjust the Panel between 0° leaning forward and 20° leaning backward.

Safety Precautions

Follow all warnings, precautions and maintenance as recommended in this user's manual to
maximize the life of your unit.
Do:
 Turn off the product before cleaning.
 Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
 Use a soft cloth moistened with mild detergent to clean the display housing.
 Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don't:
 Do not touch the LED Display screen surface with sharp or hard objects.
 Do not use abrasive cleaners, waxes or solvents for your cleaning.
 Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic fi eld.
o In direct sunlight.
 If smoke, abnormal noise or odor emits from your TFT Touchscreen LED LCD monitor, remove
the power cord immediately and call your service center.
 Never remove the rear cover of your TFT Touchscreen LED LCD monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
 Never try to repair your TFT Touchscreen LED LCD monitor yourself. Always call your service
center or a qualified technician to fix it.
1
2