Table of Contents
Advertisement
Unpacking Instructions
Remove the LED LCD Monitor out of the package and take off EPE Foam.
Remove stand and base from EPE Foam and attach to base.
Adjust the display between -5° and 15°.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user's manual to
maximize the life of your unit.
DO :
Turn off the product before cleaning.
Surface may be cleaned using a soft clean cloth moistened with mild window glass
commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don't :
Do not touch the LED display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
Over 16 hours per day.
Extremely hot, cold or humid environment.
Areas susceptible to excessive dust and dirt.
Near any appliance generating a strong magnetic field.
In direct sunlight.
If smoke, abnormal noise or odor emits from your LED LCD Monitor, remove the power
cord immediately and call your service center.
Never remove the rear cover of your LED LCD Monitor. The display unit inside contains
high-voltage parts and may cause electric shock.
Never try to repair your LED LCD Monitor yourself. Always call your service center or a
qualified technician to fix it.
Due to safety concerns, if the VESA mounting kit is purchased separately, please make
sure the mounting kit is UL-listed, and replaceable only by service personnel.
3
Advertisement
Table of Contents
