Wall-Mount Installation Instructions - Planar PXL2230MW User Manual

Wall-Mount Installation Instructions

Wall Mount Arm not included
Turn the power OFF then disconnect the cables from the TFT
Touchscreen LED LCD monitor before performing the
procedure below.
1. Lay the TFT Touchscreen LED LCD monitor face down on a
soft surface.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.
4. Follow instructions included with the Wall Mount Kit.
NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
100mm x 100mm Screw
Mounting Options
13