When The Engine Is Cold; When The Engine Is Warm - Echo CS-620P Instruction Manual

Ignition switch
Start / Run
Throttle trigger lockout
Throttle trigger
Starter handle
Unlock chain brake
Ignition switch
Start / Run
Starter handle
Unlock chain brake
Chain brake
Decompression device
Choke
Chain brake
Decompression device

WHEN THE ENGINE IS COLD

Make sure the bar and chain are free from
any obstruction when starting the chain saw.
chain brake before starting.
It is not permitted to fill fuel above the shoulder
level of fuel tank.
Do not over fill.
(Choke position
pull starter handle several times until first firing
sound.
handle again to start the engine.
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)

WHEN THE ENGINE IS WARM

Make sure the bar and chain are free from
any obstruction when starting the chain saw.
chain brake before starting.
starter handle.
firing sound, pull throttle trigger to release choke.
towards the operator immediately.
(Chain brake unlocked position)
15
CAUTION
Run" position.
)
CAUTION
Run" position.
CS-620P