Fujitsu Stylistic Q552 User Manual page 50

Figure 19. Replacing the Battery
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
WHILE THE BATTERY IS BEING REPLACED
Plug an AC Adapter into the system and connect it to a power outlet.
1
Follow steps 3 through 5 in "Cold Swapping Batteries".
2
I L
F THE ITHIUM
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I
F YOU DO NOT USE AN
P
OLYMER BATTERY CONNECTOR IS NOT FULLY SEATED
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
,
YOU MAY NOT BE ABLE TO USE YOUR
49 - Lithium Polymer Battery
Figure 20. Locking the Battery
.
T PC
ABLET
.
OR CHARGE YOUR BATTERY