Fujitsu Stylistic Q552 User Manual page 32

Changing the Pen Settings
There are a few changes you can make to your pen settings in order to make it more suitable to your needs (such as
changing the pressure sensitivity). To do so, go to Start > Control Panel and select one of the icon views from the "View
by:" dropdown. Click on the Pen and Touch icon to open the window from which you can change a variety of pen
settings.
Changing the Pen Battery
D
•
O NOT REMOVE THE TIP OF THE PEN TO REPLACE THE BATTERY
ONLY THE CAP ON THE TOP OF THE PEN
T
•
HERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN
INCORRECT TYPE
INSTRUCTIONS
The pen contains a AAAA-battery. Before proceeding, be sure to
have a new battery available.
Remove the rear Pen Cap (Figure ).
1
Remove the battery from the pen barrel.
2
Insert the new battery into the pen barrel in the same
3
orientation as the one that was removed.
Close the rear Pen Cap.
4
.
. D
ISPOSE OF USED BATTERIES IN ACCORDANCE WITH LOCAL
.
31 - Active Digitizer/Touchscreen
Pen Cap
;
REMOVE
Figure 11. Replacing the Battery
AAAA-battery
Pen Barrel