Navman MY ESCAPE II/MY TRUCK User Manual page 103

How do I search for a POI using Connect?
Before you begin, ensure your Navman is correctly plugged into your computer: plug the large end of the USB
cable directly into a USB port on your computer (not a USB hub); plug the small end into
of your Navman.
You can either search for a new location, or search using the last known location on your Navman by
completing the following:
1. In the Select Location field, you can :
Select a custom location to search. Follow the prompts to select your Country
Place name, and then select your preference.
Use the last known location on your Navman to search if your Navman stores the navigation data.
2. Click Continue. The Available Services page will display.
3. Select your preferred search service. The selected services page will display.
Depending on the country you are navigating, the available search services may vary.
4. Enter your search criteria, then click Search. A list of search results will display. For some countries you are
required to accept the terms of use.
5. Click next to the POI you want to install to your Navman. The POI will be added to My Places.
87
on the bottom
Region/State