Voice Command - Navman EZY250LM MY400LMT/MY450LMT User Manual

7. Complete the following:
If you want to ...
install a yellow
install a red map,
install the selected maps to your Navman,
8. Select the destination media (Navman internal memory) for the selected maps, then click Install Maps.
The selected maps will be installed and change colour to green.
9. To use your Navman, disconnect the USB cable. You may need to manually reset your Navman.
WARNING: Do not disconnect the USB cable from the Navman USB Socket until the installed
map or maps have changed colour to green.
How do I remove maps from my Navman?
1. Open NavDesk, and then click My Maps.
2. From the My Navman section, select the checkbox next to the map you want to remove.
3. Click Remove Maps to remove the selected maps.
4. Confirm that you want to remove the selected map when prompted. The map is removed from your
Navman. You can reinstall these maps at any time via NavDesk.

VOICE COMMAND

Voice Command is not available on all models.
Depending on your Navman model, you will be able to set the destination quickly by using Voice Command.
Voice Command is a NavDesk application that allows you to install or remove voice file for the Voice
Command function.
NavDesk VOICE COMMAND
map,
Then ...
go back to step 6.
the map needs to be activated via the Internet before
it can be installed; go back to step 4.
continue to step 8.
69