Route Options - Navman EZY250LM MY400LMT/MY450LMT User Manual

If you want to ...
set the speed limit alerts manually,
enable/disable a visual warning if
the screen is accessed in a moving
vehicle,
set how you want to receive the
camera and safety alerts,
set how you want to receive the
driver alerts,

Route options

Then ...
o Speed limit + 5 km/h (Speed limit + 3 mph): set the
system to alert while your speed is 5 km/h (3 mph) or more
above the limit.
o Speed limit + 10 km/h (Speed limit + 7 mph): set the
system to alert while your speed is 10 km/h (7 mph) or
more above the limit.
tap Set manual speed alert to select the speed limit or turn it off.
tap Warn me not to operate my Navman while driving to turn it
on or off.
tap Speed Camera / Mobile Speed Camera / Red Light Camera /
Accident Black Spot / School Zone / Railway Crossing / Speed
Check to select:
No alerts
Visual alert
Visual & Audible alerts
tap Driver Alert to select:
Auto (default): When the driving speed is above 80 km/h, the
audio and visual alerts of all driver alert options will be
enabled automatically.
When the driving speed is below 80 km/h, the audio and visual
alerts for overtaking lane and merging lane options will be
enabled, but all other driver alerts will have visual alert only.
User-defined: Allows you to set all of the driver alerts
manually by selecting:
o No alerts
o Visual alert
o Visual & Audible alerts
54