Checking Connection And Final Adjustments; Power Switch - Magellan RoadMate RV9145T User Manual

Note: Some vehicles apply power to the vehicle power receptacle only when the ignition is on.

Checking Connection and Final Adjustments

If the power indicator light on the vehicle power adaptor is on, power is being supplied to the Magellan RoadMate
receiver. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not on, turn
the vehicle's ignition on.

Power Switch

Slide the power switch to the left turn the receiver on. Slide the power switch to the center position to turn the
receiver off. (Slide the power switch to the right to reset. [Power Reset] can sometimes solve any problems
encountered while using the receiver.)
Security
It is recommended that the Magellan RoadMate receiver is not left in plain view while unattended for reasons of
theft.
Please note that the Magellan RoadMate receiver is a receiver only and does not transmit GPS location signals.
Neither the receiver nor the vehicle can be tracked using the Magellan RoadMate receiver.
9