Loewe Individual 55 Compose 3D, Individual 46 Compose 3D, Individual 40 Compose 3D, Individual 32 Compose 3D Operating Instructions Manual page 125

External devices
Programming the timer with the timer overview
All programmed recordings, marked programmes and copy orders are listed
in the timer overview. You can also programme new recordings, mark other
programmes and copy pre-recorded programmes from the DR archive to
an external recorder with the timer overview.
Call DR-archive.
Red button: Call Timer list.
Red button:
Green button:
Yellow button:
Blue button:
Explanation of the symbols in the timer list:
Record
Repeated recording (daily, weekly or Mon-Fri)
Serial recording
Decoding order (later decoding of an encrypted recorded
programme)
Marked programme (see page 50)
New entry (see right hand column).
Change recording.
Delete recording.
Delete memo.
New entry: Programme timer recording manually
➠ Timer list is opened.
Red button: Call New timer entry.
NEW TIMER ENTRY
Recording
Select Recording,
OK call.
RECORDING WIZARD
Via EPG
Select Manual.
For programming a timer recording Via EPG or Via
Teletext see page 124.
OK Call Station selection.
Select station.
OK Call Timer data.
Entry of the timer data see page 124.
After confirming the timer data the new recording is
transferred to the timer overview.
New entry: Memorize programme using the timer overview
➠ Timer list is opened.
Red button: Call New timer entry.
NEW TIMER ENTRY
ording Memo
Select Memo.
OK EPG is opened.
Note desired programme as described in Switching and
memorizing with the programme list (Seite 50).
New entry: Copying DR archive entries
➠ Timer list is opened.
➠ An external recorder is registered.
Red button: Call New timer entry.
NEW TIMER ENTRY
Memo Copy
Select Copy.
OK The DR archive is opened.
See the chapter Copying recordings in the operating
instructions of the Digital Recorder for further steps.
Memo Copy
OK
Via teletext Manual
OK
Copy
OK
Recording Vormer
OK
Reco
125 -