Attaching The Base Plate To The Handlebar Base - Garmin ZUMO 200 Owner's Manual

Getting Started
Washers
Panhead screws
Attaching the Base Plate to
the zūmo Mount
1. Thread the M4 × 40 mm panhead
screws through the washers, the
cradle, the spacers, and base plate.
2. Tighten the nuts to secure the base
plate.
Attaching the Base Plate to
the Handlebar Base
1. Align the ball of the handlebar base
and the ball of the base plate with the
double‑socket arm.
2. Tighten the knob slightly.
3. Adjust for better viewing and
operation.
4. Tighten the knob to secure the mount.

Cradle
Base plate
Spacers
Cradle
Base plate
Double-socket arm
Handlebar base
zūmo 200 Series Owner's Manual
Nuts
Knob