Programming - Miele KM-5600 Operating And Installation Instruction

Programming

To call up programming mode
To set a programme / status setting
To save settings
To not save settings
You can change the default settings of programme options
(see chart). Several settings can be altered in succession.
After programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
^ With the hob switched off, touch the s and $ or n
sensors at the same time until the relevant indicator lamp
flashes.
^ Touch the sensor for selecting the front left cooking zone.
^ Touch the + or - sensor to set the required Programme
setting.
^ Touch the sensor for the front right cooking zone.
^ Touch the + or - sensor to set the required Status setting.
^ Touch the s sensor until all the displays go out.
^ Touch the $ or n sensor until all the displays go out.
Additional functions
37