Changing The Fuse; Removing The Nüvi And Mount - Garmin nüvi 250W Owner's Manual

Changing the Fuse

CaUTiOn: When replacing
the fuse, do not lose any of the
small pieces and make sure
they are put back in the proper
place.
If your unit will not charge in your
vehicle, you might need to replace
the fuse located at the tip of the
vehicle adapter.
1. Unscrew the
black, round
end piece,
and remove
it.
2. Remove the
fuse (glass
and silver cylinder), and
replace it with a 3 A fast-blow
fuse.
nüvi 200 and 200W series owner's manual
3. Ensure that the silver tip is
Removing the nüvi
and Mount
To remove the nüvi from the cradle,
hold onto the cradle and tilt the nüvi
forward.
To remove the cradle from the
mount, turn the cradle to the right or
End End
left. Apply pressure in that direction
piece piece
until the cradle snaps off the mount.
Silver tip Silver tip
To remove the suction cup mount
Fuse Fuse
from the windshield, flip the lever
toward you. Pull the tab on the
suction cup toward you.
placed in the black end piece.
Screw on the black end piece.
Appendix
2