Internet Setup Selections For An Aoss Access Point; Internet Setup Selections For A Wii Lan Adapter - Nintendo Wii Operation Manual

Channels and settings
Hide thumbs Also See for Wii:
Table of Contents

Advertisement

W i i S e t t i n g s a n d D a t a M a n a g e m e n t
Internet Setup Selections
Step 1
for an AOSS™ Access Point
If the access point you are using
supports AOSS (Buffalo Corporation)
you can easily configure your Internet
settings with this feature. For details,
refer to the instruction manual for
your access point.
NOTE: If you are already using other
Select the Connection Settings
wireless devices, using AOSS may
change the settings of your access
option.
point.
Step 4
Step 5
Wii Console:
Follow the instructions on the TV screen.
AOSS Access Point:
Press the AOSS button (the SET switch),
holding it down until each of the
corresponding LEDs light up.
Select the "AOSS" option.
• If this procedure fails repeatedly, wait
3 minutes and try again.
60
Step 2
Step 3
Select an open connection indicated
Select Wireless Connection.
by "None".
Step 7
Step 6
Select OK to test the connection.
Select OK.
If the test succeeds, you've completed
Internet Setup and your Wii is wirelessly
connected. If the test fails, consult the
Troubleshooting section in this manual.

Internet Setup Selections for a Wii LAN Adapter

If you have a wired local-area network instead of a wireless network, you can
connect your Wii directly to the network with a Wii LAN Adapter (subject to
availability). Consult your adapter manual for details on how to connect a Wii
LAN Adapter. (The Wii LAN Adapter does not support PPPoE.)
When it's ready, step through the following Internet Setup process.
Step 1
Step 2
Select an open connection indicated
Select the Connection Settings
by "None".
option.
NOTE: Select the Console Information option if you need to check the MAC address.
This information may be needed for manual setup of an Internet connection.
Broadband
Wired
Wii LAN
Wii
Internet line
router
Adapter
console
Step 3
Step 4
Select Wired Connection.
Select OK to test the connection.
If the test succeeds, you've
completed Internet Setup and your
Wii is connected. If the test fails,
consult the Troubleshooting section
of the manual.
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents