Configuring Internal Power Supplies; Information About Internal Power Supplies; How To Configure Internal Power Supplies; Configuring An Internal Power Supply - Cisco Catalyst 2960-XR Configuration Manual

Configuring Internal Power Supplies

•
•
•
•
•

Information About Internal Power Supplies

See the switch installation guide for information about the power supplies.

How to Configure Internal Power Supplies

Configuring an Internal Power Supply

You can use the power supply EXEC command to configure and manage the internal power supply on the
switch. The switch does not support the no power supply EXEC command.
SUMMARY STEPS
1. power supply switch_number slot{A | B} { off | on }
2. show environment power
DETAILED STEPS
Command or Action
Step 1 power supply switch_number slot{A | B} {
off | on }
OL-29420-01
Information About Internal Power Supplies , page 79
How to Configure Internal Power Supplies, page 79
Monitoring Internal Power Supplies, page 80
Configuration Examples for Internal Power Supplies, page 80
Feature History and Information for Internal Power Supplies, page 81
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
C H A P T E R
Purpose
Sets the specified power supply to off or on by using one of these
keywords:
7
79