Garmin iQue M4 Operating Instructions Manual page 46

C > C P
USTOMIZING HANGING ERSONAL
To set a password:
1. Tap , Settings, and the Password icon.
2. To activate a password, tap to check the box next to Prompt if device unused for. Then, from the drop-down menu, select how long
you want your iQue M4 to sit idle before it asks for a password.
3. Choose a password type from the Password type drop-down menu.
4. Enter the password. If you chose Simple 4 digit as the password type, you must enter a four-digit number. If you chose Strong
alphanumeric, reenter the password in the Confirm field.
5. Tap the Hint tab and enter a hint to help you remember your password.
6. Tap . Then tap Yes to confirm your changes.
To change or delete a password:
1. Tap , Settings, and the Password icon.
2. Enter your password.
3. Change your password to a new password. To stop using a password, uncheck the box next to Prompt if device unused for.
To change sounds:
1. Tap , Settings, and the Sounds & Notifications icon.
2. Tap to check boxes for the sounds you want to hear and uncheck boxes for the sounds you want to silence.
NOTE: You can adjust the volume from the Today page by tapping
To change notifications:
1. Tap , Settings, and the Sounds & Notifications icon. Then tap the Notifications tab.
2. Tap the Event drop-down menu to choose an event.
3. Tap to check or uncheck the Play sound box. Tap to check or uncheck other notification settings as needed.
42
S
ETTINGS
A simple password, a strong password, and a password hint
The Sounds tab
and dragging the slider bar up or down.
The Notifications tab
iQue M4 Operating Instructions
®