Using Menus And Menu Commands - Garmin iQue 3000 Operating Instructions Manual

Using Menus and Menu Commands

Menus on your handheld are easy to use and work the same way in all applications, although the menu commands in each
application are different. Menu commands for each application are described in Chapters 4 and 5. For information on Edit menu
commands, see "Using the Edit Menu"
Most menu commands have an equivalent Graffiti
commands on computers. To use Graffiti 2 menu commands, menus must be closed.
To display a menu bar and choose a command, do one of the following:
• Open an application (such as the Date Book); then tap the Menu icon
• Tap the tab in the upper-left corner of the screen. Then tap the desired command from the menu.
• In the text input area of your device's screen, drag a diagonal line from the lower-left to upper-right to display the
Command toolbar. The command bar appears for approximately 4 seconds.
• Tap an icon that represents the command you want, or enter the shortcut for the command in the text input area below the
Command toolbar. For example, to choose Select All in the Edit menu, draw the Graffiti 2 command stroke in the text area to
display the Command toolbar and then draw the letter S. If you wait more than three seconds to draw the shortcut letter, you
must redraw the Graffiti 2 command stroke to view the Command toolbar.
Displaying Tips
Many of the dialog boxes that appear on your handheld contain a Tips icon
you may have and provide shortcuts for using the dialog box or other useful information.
To display a tip:
1. Tap the Tips icon
2. When you are finished viewing the tip, tap Done.
iQue 3000 Operating Instructions
®
in Chapter 5.
®
.
Tips Icon
2 command stroke, which is similar to keyboard shortcuts used to execute
Command Toolbar
I > U
NTRODUCTION SING
. Select the desired command from the menu.
in the upper-right corner. Tips anticipate questions
M M C
ENUS AND ENU OMMANDS
9