Garmin iQue 3000 Operating Instructions Manual page 42

B A > S
ASIC PPLICATIONS CHEDULING
4. Set the duration for the event:
• If the event is one hour long, skip to the end of this procedure.
• If the event is longer or shorter than an hour, tap directly on the time to open the Set Time dialog box.
TIP: You can open the Set Time dialog box (to select a start time) by making sure no event is selected, and then writing a
number on the number side of the text input area.
5. Set the duration of the event in either of the following ways:
• Tap the time columns in the Set Time dialog box to set the Start Time. Then tap End Time and tap the time columns to set the End
Time.
• Tap All Day if the event lasts all day. The default hours of a standard business day are set by the user, and can be changed using
the Preferences command in the Date Book application. See
Start Time highlighted
6. Tap OK.
38
E
VENTS
Tap the time
to display
the Set Time
dialog box.
"Changing the Displayed Start and End Times" later in this chapter.
Tap to scroll to earlier hours
Tap to change hours
Tap to change minutes
Tap to scroll to later hours
iQue 3000 Operating Instructions
®