EverFocus EBD431e User Manual page 7

b. If you want to wire the cables through the wall, attach and then
screw the Camera Base to the ceiling / wall. Attach the Camera
Body to the Camera Base.
5. Connect the camera to the 12V DC power source using the supplied
Power Adapter Pigtail or a power adapter.
6. Connect the camera to a DVR or a portable monitor using the
Video‐Out cable for viewing the camera view while adjusting camera
focus, zoom and angles.
7. Screw back the Outer Housing and adjust the camera angle
simultaneously.
8. Adjust camera focus / zoom using the supplied Adjustment Screw.
9. Screw back the Set Screw using the supplied Hexagon Wrench.
5
EBD431e