Super Io Configuration - ECS A55F-M2 Manual

Super IO Configuration

Use this item to show the information of Super IO configuration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset M.I.B.III Boot
Super IO Configuration
Serial Port 0 Configuration
Parallel Port Configuration
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Serial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset M.I.B.III Boot
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Security Save & Exit
Set Parameters of Serial Port
0 (COMA)
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Security Save & Exit
Enabled or Diabled Serial Port
(COM)
[Enabled]
IO=3F8h; IRQ=4;
: Select Screen
/Click: Select Item
[Auto]
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Using BIOS
37