Sata Configuration - ECS A55F-M2 Manual

SATA Configuration

Use this item to show the mode of serial ATA configuration options.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset M.I.B.III Boot
SATA Configuration
Serial-ATA Controller
SATA Mode
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Port6
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Serial-ATA Controller (Enabled)
Use this item to select the Serial-ATA controller options: Disabled, Compatible,
Enabled.
SATA Mode (IDE)
Use this item to select SATA mode.
SATA Port1~6 (WDC WD5000AAKX (500.1/Not Present)
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel,
and each channel allows one SATA device to be installed. Use these items to configure
each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
Security Save & Exit
[Enabled]
[IDE]
WDC WD5000AAKX (500.1
Not Present
Not Present
Not Present
Not Present
Not Present
Using BIOS
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
35