Entering Data - Garmin GPSMAP 178C Owner's Manual

Naming a waypoint or placing any sort of data that has not been predefi ned requires the use of
both the ARROW KEYPAD and the ENTER/MARK key.
To enter a name or number in a data fi eld:
1. Once you have accessed a page with programmable data fi elds (e.g. ' Waypoint Edit') you can use
the ARROW KEYPAD to move the cursor (Highlight) to fi elds on the page. Use the UP/DOWN
arrows to move up or down and the LEFT/RIGHT arrows to move sideways.
2. Pressing the ENTER key with the fi eld highlighted begins the process for entering data in the form
of alphanumeric characters.
3. Use the ARROW KEYPAD UP/DOWN arrows to cycle through numbers 0 to 9, plus/minus symbols,
blank space, and the alphabet. Pressing and releasing the keypad moves you character by character
through the list. Pressing and holding the keypad moves you rapidly through the list.
4. Use the ARROW KEYPAD LEFT/RIGHT arrows to move to the next character on the line or back-
wards to edit characters. If there are more than two lines of data, keep pressing to the RIGHT to
drop down to the next line.
5. When data entry is completed press ENTER to accept data, then move to the next programmable
fi eld. Not all data fi elds are programmable, such as the date and time. When moving about a page
with these fi elds, the cursor skips over them.
Every fi eld and button on this page
can be programmed or activated.
A waypoint symbol can be selected
from a list of symbols.
A comment can be added.
The coordinates can be changed.
The waypoint can be renamed.
A depth can be entered.
A water temperature can be
entered.
Option buttons can be activated.
Getting Started

Entering Data

Pressing UP or DOWN
on the ARROW KEYPAD
changes numbers and
letters.
Pressing LEFT or RIGHT
on the ARROW KEYPAD
moves the cursor along the
line or to the next line.
Data Entry Field
Non-programable
data fi elds
3