Turning The Door Chime On Or Off; Changing Nt9010 Speaker Volume; Changing Telephone Prompt Volume - DSC Envoy NT9010 User Manual

Turning the If your installer has enabled the door chime feature, your NT9010 will beep when-
Door Chime ever designated doors or windows are opened or closed. The NT9010 may also
announce the zones that were opened or closed, if programmed. Your installer
On or Off
has programmed which doors and windows will activate the door chime.
1. Press
2. Press
Changing You can select from 3 different volume levels for NT9010 announcements - low,
NT9010 medium, and high.
Speaker
1. Press the Volume function key. The NT9010 volume increases to the next level
Volume
2. Repeat step 1 until you find a volume setting you like.
3. When you have selected the volume level you want, press
Changing If you will be using a telephone to access your system, you can change the volume
Telephone of the telephone prompts. You can select from three different telephone volume
Prompt levels, low, medium and high.
Volume
1. Press
2. To change the volume, press
3. Repeat step 2 until you find a volume setting you like.
4. When you have selected the volume level you want, press
22
to turn the door chime feature ON
4
The keypad will beep 3 times.
again to turn the door chime feature OFF
4
The keypad will sound one long beep.
The function button labeled Chime can also perform the same function if it is
pressed and hold for 2 seconds. When door chime is enabled the keypad will
beep 3 times. When door chime is disabled the keypad will sound one long
beep.
and will announce the volume level it is at.
[Master Code]
6
level: "Phone volume is low."
. The NT9010 announces the telephone volume
7
.
1
to exit.
#
to exit.
#