Table of Contents
Advertisement
4. Next, use the keypad arrow keys to scroll to the display "Set System
Date." Press [
5. Enter the current date (MMDDYY). For example, to program May
31, 2000 type "053100."
6. Once the date and time have been programmed, press [#] twice to
return the partition to its normal disarmed state.
3.5 Activating Door Chime
Keypad Command: [
When the door chime feature is enabled, the keypad will emit five quick
beeps when a zone is opened or closed.
The keypad will only beep for zones which have the door chime zone
attribute enabled. Often this feature is applied to entry doors so that you
are notified when someone enters or exits the premises.
To enable door chime, enter [
zone attribute for a particular zone, please ask your installer.
NOTE: The door chime feature will not work on bypassed zones.
3.6 Viewing the Event Buffer
Keypad Command: [Master Code][9]
Each system event is stored in an event buffer which can be viewed from
any keypad. To view the event buffer, perform the following:
1. Enter a System Master code and press [9].
2. Use the keypad arrow keys (< >) to scroll to the display "View Event
Buffer." Press [
3. The event buffer can now be viewed, starting with the most recent
event. When an event is presented, the first line of the display will
show the event number and the partition on which the event
occurred; the second line of the display will show the date and time
of the event. Press the [
Use the arrow keys to scroll through the list of all events in the event
buffer.
4. To stop viewing events, press [#].
3.7 [✱ ✱ ✱ ✱ ✱ ][7] Command Outputs 1-8
Keypad Command: [
These outputs must be programmed by your installer. Up to eight
command outputs can be added on each partition. These outputs will
operate sets of lights, door strikes and various other items depending on
what you and your installer have decided to add to your system.
To activate the output, enter [
1-8. For more information regarding the [
ask your installer.
S e c t i o n
✱
].
✱
][4]
✱
] [4] at any keypad. To program the chime
✱
].
✱
] key to display a description of the event.
✱
][7][1-8]
✱
] [7] followed by the output number, from
3 :
S y s t e m
A d m i n i s t r a t i o n
✱
] [7] command outputs, please
21
Advertisement
Table of Contents
