Page 1
Navigation Software ™ setup guide This setup guide includes instructions to connect your GPS 18 to your computer, install software on your computer, and unlock the detailed maps. To ensure a successful installation, follow the steps outlined in this guide.
Page 2
Attention! Do not connect the enclosed Garmin USB cable to your computer until you have loaded the MapSource software. Step 1: Install nRoute 1. Insert the DVD into your computer’s DVD-ROM drive. If auto-run is enabled, your computer will automatically display a welcome screen.
Page 3
1. Insert the end of the GPS 18 USB cable into an available USB port on your computer. 2. Once the GPS 18 USB is connected, Windows should automatically locate and install the drivers. If Windows is unable to locate and install the drivers, select your DVD-ROM drive from the “Add New Hardware”...