Table of Contents
Advertisement
2 . 4
PLACARDS
After completion of the GPS 150 system installation,
instrument panel in the location shown in Figure A-3 which states "GPS limited to VFR
use only".
GARMIN placard p/n
be used for this purpose.
3 . 0
OPERATIONAL CHECKOUT
When the installation is complete, conduct a post installation checkout as specified
in section 4 of the Installation Manual, being sure to check the proper operation of all
connected
instruments.
4 . 0
RETURN TO SERVICE
After installation, a new weight and balance must be computed to show the GPS 150
components.
The aircraft should then be returned to service by completion of FAA
form 337 by an appropriately certificated person.
5 . 0
CONTINUED AIRWORTHINESS
Maintenance of the GPS 150 is on condition only.
150 is not required.
161-00024-00 or an appropriate equivalent should
Periodic maintenance of the GPS
affix a durable placard on the
Av. Kit Install. Manual
190-00026-00 Rev. Q
Page 23
Advertisement
Table of Contents
