Table of Contents
Advertisement
SEWING MACHINE DIV.20
MODEL 385. 11206300
WIND THE BOBBIN
1.
PULL THE HANDWHEEL
OUT.
2.
DRAW THREAD
FROM THE SPOOL. GUIDE THE THREAD AROUND THE THREAD
GUIDE.
THREAD THROUGH
THE BOBBIN WINDER TENSION DISK "A" AND THE HOLE IN
THE BOBBIN FROM THE INSIDE TO THE OUTSIDE.
3.
PLACE BOBBIN ONTO BOBBIN WINDING
SPINDLE
"B" WITH END OF THREAD
COMING
FROM THE TOP OF THE BOBBIN.
PUSH BOBBIN
WINDING
SPINDLE
TO THE RIGHT UNTIL IT CLICKS.
4.
HOLDING
THE END OF THREAD,
START
MACHINE.
WHEN BOBBIN
IS SLIGHTLY
FILLED,
SNIP OFF THE END OF THREAD.
5.
WIND THREAD
UNTIL BOBBIN
STOPS.
REMOVE
BOBBIN.
6.
PUSH THE HANDWHEEL
TO THE LEFT.
A
PLACE BOBBIN IN BOBBIN CASE
MAKING SURE THREAD FEEDS
CLOCKWISE
AND IS COMING
FROM BOBBIN AS SHOWN.
PULL THREAD THROUGH
SLOT OF CASE AS SHOWN.
3
PULL THREAD UNDER TENSION
SPRING AND THROUGH THE
OPENING AS SHOWN ABOVE.
HOLDING LATCH OPEN, POSITION
CASE INTO SHUTTLE AND
RELEASE LATCH.
CASE SHOULD LOCK INTO PLACE
WHEN LATCH IS RELEASED.
Hide quick links:
Advertisement
Table of Contents
