GE JKP27 Owner's Manual page 16

Usingthe self-cleaning oven. ovens operated with t o ch pads;
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
HOUR el MIN
MIN
How to Delay the Start of Cleaning
[] Press the SELFCLF_AN p ad.
[] Using tile HOURand MIN + or -
pads, enter the desired (lean time.
[] Press the
DEIAY S TART pad.
[] Using tlle HOURand MIN + or -
pads, enter the time of day you want
the clean cyde to slart.
[] Press the
STARTpad.
Tile door locks automatically. The display
will show the stmt time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED DOOR
light goes oil
When tile LOCKED DOORlight is oil open
tile door.
NOTE: Onmodelswith touchpadcontro/s for
bothovens, y oucanset a delaydean in both
ovens at thesametime.Thesecond ovenset wi//
automatically d elaythestartof cleaninguntilthe
endof thefirstoven's dean cycle.
To recallthestart tYneof thesecond ovenset,
presstheDELAY START p adon thecontrolsfor
thesecond oven.
After a Clean Cycle
You inay notke some white ash in the
oven. Wipe it up _4tll a &m_p (loth after
the oven cools.
If whitespotsremain, r emove themwitha soap-
filledsteelwoolpadandrinsethoroughly witha
wnegar a ndwatermixture.
These deposits are usually a sah
residue that cannot be removed by
tile clean _ycle.
If the oven
is
not (lean af/er one (lean
Q_(le, repeat tile Q_(le.
}!:: Y ou cannot set the oven for cooking
until tile oven is cool enough ti)r the
door to unlo(k.
i_?If the shelves become hard to
slide, wipe tile shelf supports with
cooking oil.
16