Device Ports
Your Fujitsu LIFEBOOK Tablet PC and the optional Port Replicator come equipped with multiple ports to which you can
connect external devices including: disk drives, keyboards, printers, etc.
Internal LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for a Gigabit
(10Base-T/100Base-Tx/1000Base-T) Ethernet
LAN connection. You may need to configure
your Tablet PC to work with your particular
network. (Please refer to your network
administrator for information on your network
configuration.) To connect the LAN cable follow
these easy steps: Align the connector with the
port opening.
Push the connector into the port until it is
1
seated.
Plug the other end of the cable into a LAN
2
outlet.
Port Replicator Connector
The port replicator connector located on the bottom of your system is used for the connection of your Tablet PC to an
optional port replicator. (See Figure 6 for location). In order to connect your Tablet PC to this device, follow the
instructions that came with your port replicator.
1
Figure 47. Connecting the LAN
87 - Device Ports
LAN Connector
2