Fujitsu LifeBook T732 User Manual page 73

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged.
There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay, follow these easy steps (Figure 38):
Have a charged battery ready to install.
1
Shut down your Tablet PC and disconnect the AC adapter.
2
While pushing the battery bay release latches in the directions shown in Figure 38, slide the battery out of the
3
bay.
Insert a new battery into the bay, and press it in firmly so that the latches click into place.
4
Plug in the AC adapter and turn the power on.
5
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
WHILE THE BATTERY IS BEING REPLACED
Plug an AC Adapter into the system and connect it to a power outlet.
1
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I
F YOU DO NOT USE AN
72 - Lithium ion Battery
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
.