Changing The Needle 1:15; Needle Thread Tension - Pfaff 1529 Owner's Manual

B
C
Operate your Pfaff select
Changing the needle
A
Switch off the main switch.
To remove: Lower the presser foot
and move the needle to its highest
point. Now loosen the needle
screw (18) and pull the needle
down.
To insert: The at side A of the
needle must face to the rear.
Lower the presser foot and insert
the needle, pushing it up as far
as it goes. Hold the needle and
tighten the needle screw (18)
rmly.
Setting the needle thread tension
Set the required needle thread tension
(10) with the help of the mark B.
The normal setting for sewing is 4 to 5.
For embroidering, darning and button-
hole set the tension between 2 and 3.
Dropping the feed dog
For certain sewing work, e.g. darning the
feed dog has to be dropped.
To do this, open the bobbin case/hook
cover and move slide C fully to the right.
Now the feed dog is dropped.
1:15
1:15