Pfaff 1529 Owner's Manual page 19

Operate your Pfaff select 1:7
C
Winding through the needle
Even if the machine has been completely
threaded, you can still wind the bobbin.
Raise presser foot lifter (19). Pass the
needle thread through the presser foot
and downwards; then through the right
threading slot (11) and upwards.
Now, pull the thread into the take-up
lever from left to right (9). The take-up
lever must be positioned at its very top.
Pass the thread to the right under the
guide hook C. Then wind the thread
several times around the bobbin. Press the
foot control and winding the bobbin.
Don't forget:
Make sure to stop the needle from
moving while winding the bobbin (see
page 1:4).
1:7