Using Proximity Waypoints - Garmin eTrex Venture Cx, Legend Cx Owner's Manual

Using Proximity Waypoints

Use the Proximity Waypoints Page to define an alarm
circle around a stored waypoint location.
Proximity
icon
Proximity
Alarms
check box
To add a proximity waypoint:
1. Press the Menu key twice to open the Main
Menu.
2. Highlight the Proximity icon, and press Enter
to open the Proximity Waypoints Page.
3. Highlight an empty line, and press Enter to
open the Find Menu.
eTrex Venture Cx and Legend Cx Owner's Manual
4. Select a waypoint from the Waypoints List or
5. With the Use button highlighted, press Enter
Radius
field
New Entry
6. Use the Rocker to highlight the Radius field
line
To turn proximity alarms on or off:
1. Press the Menu key twice to open the Main
2. Highlight the Proximity icon, and press Enter
3. Highlight the Proximity Alarms check box,
B O > C
ASIC PERATION REATING AND
from any other group of map points, and press
Enter to open the information page for the
item.
to add the point to the list on the Proximity
Waypoints Page.
if you want to enter a value different than the
default of 1 mile.
Menu.
to open the Proximity Waypoints Page.
and press Enter to initiate the alarm feature.
When you trigger an alarm, a tone sounds and
a "Near Proximity Point" message appears.
When you move outside the set radius, a
"Leaving Proximity Point" message is shown.
U W
SING AYPOINTS
15