To calibrate the electronic compass:
1. Press MENU > Calibration.
2. With Start selected, press ENTER, and follow
on-screen directions for holding and turning the
unit.
Hold the unit
level and turn
slowly.
•
A Just Right, Too Fast, or Too Slow message
appears notifying you to adjust your turning
speed. Hold the unit level while turning.
•
A Calibration Successful message appears
when finished.
•
If a Calibration Failed message appears,
repeat the process.
3. Press ENTER to return to the Compass page.
eTrex HC series Owner's Manual
Compass Page Options
•
Sight 'N Go—navigate to an object within your
sight (Vista HCx and Summit HC only).
•
Stop/Resume Navigation—turns active
navigation for a route or Go To on and off.
•
Recalculate—recalculates the path to a
destination.
•
Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
•
Data Fields—selects the number of data fields
that appear on the Compass page.
•
Change Data Fields—selects the type of data
you want to show in the data fields.
•
Calibrate Compass—accesses the compass
Calibration page (Vista HCx and Summit HC
only).
•
Restore Defaults—returns to factory settings.
M
p
aIn
aGeS