Garmin Edge 705 Owner's Manual page 11

Release
lever
Bke mount
For horizontal bars: Separate and
remove the top part of the mount,
turn it 90 degrees, and replace it.
Continue with step 2.
For bars with a diameter less than
1 in (25.4 mm): Place the additional
rubber pad under the bike mount to
increase the diameter of the bar. The
rubber pad also prevents the mount
from slipping. Continue with step 2.
2. Attach the bike mount
securely using two cable ties.
Make sure the cable ties are
threaded through both parts of
the bike mount.
Edge 605/705 Owner's Manual
Wedge
(optonal)
G
3. Align the Edge with the bike
mount so that the Edge is
parallel to the stem.
Cable tes
4. Slide the Edge to the left until
it snaps into place.
S
ettinG tarted
Release
lever
5