Enabling An Alternate Tftp Server; Using Phone Network Configuration Screen - Cisco Access Registrar 4.2 Configuring Network Settings

Configuring TFTP Options
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8

Enabling an Alternate TFTP Server

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-30
To set TFTP Server2, in the TFTPServer2 field enter an address and click
b.
Apply.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page 4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to TFTP Server 1.
Press the Edit softkey.
Enter a new TFTP server address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press Validat.
Scroll to TFTP Server 2 to add a backup TFTP server.
Press Save.
If you are using DHCP, but you want to override the TFTP address that the phone
received through DHCP, enable an alternate TFTP Server.
To assign an alternate TFTP server for the Cisco Unified IP Phone, follow these
steps:
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-6.
OL-8617-01