Cisco Access Registrar 4.2 Configuring Network Settings page 3

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
The Phone Configuration web page described in this chapter differs from the User
Note
Options web pages, which gives users control over various phone options and
features, and the Cisco Unified CallManager Administration Phone
Configuration pages, which let you configure many phone functions and features.
For more information about the User Options web pages, refer to the Customizing
Your Cisco Unified IP Phone on the Web. For more information about the
Cisco Unified CallManager Administration Phone Configuration pages, refer to
the Cisco Unified CallManager documentation.
To access the Phone Configuration web page for a phone, follow these steps:
Procedure
Open a web browser and enter the following URL, where IPaddress is the IP
Step 1
address of your phone:
http://IPaddress
On the Cisco Unified IP Phone 7905G and 7912G, you can determine the IP
address by pressing the Menu button, choosing Settings > Network
Configuration, and then scrolling to IP Address.
For example, the Phone Configuration web page for a Cisco Unified IP Phone
with the IP address 192.168.3.225 is http://192.168.3.225
Step 2 Press Enter.
The Phone Configuration web page appears.
You can control whether users can access the web pages for a phone. For more
Note
information, see the
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Accessing Network Settings through a Phone Configuration Web Page
"Disabling Web Page Access" section on page A-8.
4-3