Assigning A Tftp Sever; Using Phone Configuration Web Page - Cisco Access Registrar 4.2 Configuring Network Settings

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Configuring TFTP Options

Assigning a TFTP Sever

Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
If you do not use DHCP to direct the Cisco Unified IP Phone to a TFTP server,
you must manually assign one. You can also assign an alternative TFTP server to
use instead of the one assigned by DHCP.
This section covers these topics:
Assigning a TFTP Sever, page 4-29
•
Enabling an Alternate TFTP Server, page 4-30
•
If you are not using DHCP in your network, and you want to change this setting,
you must manually assign the TFTP server to the phone.
Before you can manually assign a TFTP server, you must enable an alternate
TFTP server. For instructions, see the
section on page 4-30.
To assign a TFTP server for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the TFTP servers:
To set TFTP Server1, in the TFTPServer1 field enter an address and click
a.
Apply.
"Enabling an Alternate TFTP Server"
"Accessing Network Settings through a Phone
4-2.
Configuring TFTP Options
4-29