Safety Rules For Oscillating Tools; Service - Dremel MM20 Operating/Safety Instructions Manual

Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool's operation. If damaged,
have the power tool repaired before use.

Safety Rules for Oscillating Tools

Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting tool may contact hidden
wiring or its own cord.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Use a metal detector to determine if there
are gas or water pipes hidden in the work
area or call the local utility company for
assistance before beginning the operation.
Always hold the tool firmly with both hands
for maximum control. Keep proper footing
and balance at all times.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.

Service

Have your power tool serviced by a qualified
repair person using only identical
replacement parts.
Keep hands away from cutting area. Do
not reach under the material being cut.
Do not use dull or damaged blades.
Exercise extreme caution when handling
the accessories.
Wear protective gloves when changing
cutting accessories.
Use thick cushioned gloves and limit the
exposure time by taking frequent rest
periods.
Before scraping, check workpiece for nails.
If there are nails, either remove them or set
them well below intended finished surface.
Do not wet sand with this tool.
Never work in area which is soaked with a
liquid, such as a solvent or water, or
dampened such as newly applied
wallpaper.