Turn On Power To Your Heating And Cooling System; Set Time And Date; Review Pre-Programmed Schedule - White Rodgers UP400 Installation Instructions & User Manual

3.4 Turn on power to your heating and
cooling system.

3.5 Set time and date

1. Press the MENU icon and then press the SET TIME icon.
2. Using the arrows, adjust the hour then press SET.
3. Adjust the minutes, and press SET.
4. Repeat the process to set the year, month and date. The day of the
week will automatically be set.
5. Press DONE when you are fi nished.
Congratulations!
You have completed the basic setup of
your new thermostat. It's ready to use.
To read about additional thermostat features, continue to section 4.
16

3.6 Review pre-programmed schedule

The thermostat is set to control temperature according to the following
pre-programmed, energy-effi cient schedule. If this schedule meets
your needs, no further action is required.
Mon - Fri
Period Start Time
Morning 6 am
Day 8 am
Evening 5 pm
Night 10 pm
Morning 6 am
Day 8 am
Evening 5 pm
Night 10 pm
To customize this schedule, continue to the next page (section 4.1).
Sat - Sun
Temp Start Time Temp
70°F 6 am 62°F
60°F 8 am 70°F
70°F 5 pm 70°F
62°F 10 pm 62°F
78°F 6 am 82°F
85°F 8 am 78°F
78°F 5 pm 78°F
82°F 10 pm 82°F
17