Chapter 5 Tutorials
In the example network, configure 2 as the port VID on port 1 so that any untagged frames
received on that port get sent to VLAN 2.
Figure 29 Port VID Example
Click Configuration > VLANs > Ports in the navigation panel.
1
Set Port VLAN Mode to Specific and enter 2 in the Port VLAN ID field for port 1.
2
To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
3
you can either select Untag_all in the TX Tag field to set the Switch to remove any VLAN tags
before sending or leave the TX Tag field at Untag_pvid to have the Switch remove a frame's VLAN
tag when the frame's VLAN ID is the same as the PVID of the port on which the frame is
transmitted.
click Save to save your changes back to the Switch
4
40
GS1910/XGS1910 Series User's Guide