Xerox DocuColor 12 User Manual page 38

9 Clear (C) - When a screen with numeric entry is
displayed, pressing the Clear (C) button cancels
1
all the information previously entered and displays
the default value. Use this button in the following
cases:
•
•
2
•
3
4
NOTE: Clear is not applied if a job is incomplete
or the machine is displaying a Jam or Interlock
Open screen.
5
6
7
GETTING TO KNOW YOUR DOCUCOLOR 12
To clear the copy quantity that was selected
and to reset the quantity to 1.
To restore the copier/printer to the
programming condition when a fault or a jam
occurs and a message displays on the Touch
Screen. Further programming selections can
be entered without clearing the previous
selections. (Only the copy quantity that was
selected is reset to 1.)
To cancel all the information previously
entered and display blank fields ready for new
data entry on the Access Number Entry
screen.
When the Clear button is selected while the
copier/printer is in Interrupt mode, it is applied
only to the interrupting job.
When the Clear button is selected with the
Stored Job feature, it is applied only to the
selected job.
2–6 DOCUCOLOR 12 USER GUIDE