Configuration Menu; Access Set-Up - Option 1; Wan Set-Up - Option 2; Bridging Set-Up - Option 3 - D-Link DI-1135 Reference Manual

Configuration Menu

Device: DEV050607
Option
1. Access set-up
2. WAN set-up
3. Bridging set-up
4. Internet set-up
5. IP Routing set-up
6. IPX Routing set-up menu
7. SNMP set-up
8. Filter set-up
Enter option number, "=" - main menu, <TAB> - previous menu
>
The CONFIGURATION MENU provides paths to menus for total device configuration.

Access Set-Up - Option 1

Takes you to the Access Set-Up Menu, where passwords, names, dates and times are set and viewed. From this
menu, you can save or restore the bridge/router configuration and connect to another bridge/router in the network of
bridge/routers.

WAN Set-Up - Option 2

Takes you to the WAN Set-Up Menu, where the Wide Area Network links are configured and controlled.

Bridging Set-Up - Option 3

Takes you to the Bridging Set-Up Menu, where the parameters for bridging are selected. The Spanning Tree
Protocol (STP) may also be managed from this menu.

Internet Set-Up - Option 4

Takes you to the Internet Set-Up Menu, where the parameters for the Internet configuration are selected.
CONFIGURATION MENU
Value Description
menu - Establish access parameters
menu - Configure WAN operation
menu - Configure bridge operation
menu - Define IP environment
menu - Define routing environment
- Define IPX environment
menu - Define SNMP communications
menu - Define filtering criteria
DI-1135 X.25 Bridge/Router Menu Reference Manual
X.25 Menus: Configuration Menu
11
V XTF5.9.X