Navigate To A Waypoint - Garmin 55 AVD Owner's Manual

The GPS 55 provides the waypoint name and bearing/range/estimated time
enroute from present position. The entire list of nearest waypoints (indicated
by xxx1 through xxx9) may be viewed by pressing the MORE key while the
cursor is under the waypoint name.
To view nearest waypoint lists...
· Press WPT repeatedly until the above page appears.
· Press MORE until the desired type (APT, VOR, or USR) appears.
· Press ENT to display the Nearest Waypoint Page.

3.8 NAVIGATE TO A WAYPOINT

The GOTO function allows you to quickly set a course from your position to
any waypoint.
Desired
Track
To activate the GOTO function...
· Press GOTO. The Active Route Page will be displayed with the cursor
under the GOTO waypoint field. If the GPS 55 is currently navigating
to a waypoint, that waypoint will be offered as the default GOTO
waypoint.
· Confirm the default GOTO waypoint by pressing the ENT key (this will
re-center CDI on the CDI page) or enter the desired GOTO waypoint
name. The CDI Page will be displayed.
3-10
ACTIVE ROUTE PAGE (GOTO MODE)
GOTO Waypoint
Waypoint Type
(APT, VOR, USR)
Range
Estimated
Time Enroute