1. While holding the top cover in one hand, connect the optical drive cable to its connector on the system board (JOD) and the media cable to its connector

on the system board (JMEDIA).

2. Set the top cover in place and attach it to the computer with six M2.5 x 5-mm screws on the left side and seven M2.5 x 5-mm screws on the right side of

the top cover at the embossed arrows.

3. Replace the cosmetic covers (see

NOTICE:

To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.

4. Firmly attach the keyboard to the computer and close the display (see

5. Turn the computer upside down and replace the system battery (see

Back to Contents Page

media cable

Replacing the Cosmetic

Covers).

Closing the

Display).