Removing The Power-Button Board; Replacing The Power-Button Board - Dell XPS L701X Service Manual

Back to Contents Page
Power-Button Board
Dell™ XPS™ L701X Service Manual
Removing the Power-Button Board
Replacing the Power-Button Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Power-Button Board
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Follow the instructions in step 5
6. Remove the optical drive (see
7. Remove the palm-rest assembly (see
8. Turn the palm-rest assembly over.
9. Lift the connector latch and pull the pull-tab to disconnect the power-button board cable from the connector on the power-button board.
10. Remove the two screws that secure the power-button board to the palm-rest assembly.
11. Lift the power-button board off the palm-rest assembly.
1 screws (2) 2
3 power-button board 4
Replacing the Power-Button Board
1. Follow the instructions in Before You
Begin.
Battery).
Removing the Module Cover).
Removing the Memory Module(s)).
in Removing the Hard Drive(s).
Removing the Optical Drive).
Removing the Palm-Rest
palm-rest assembly
power-button board cable connector
Begin.
Removing the
Assembly).
Battery) before working inside the