Camera (Optional); Removing The Camera; Replacing The Camera - Dell XPS M1210 Service Manual

Back to Contents Page
Camera (Optional)
Dell™ XPS™ M1210 Service Manual
Removing the Camera
Replacing the Camera
Removing the Camera
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
computer.
NOTE: The camera is an optional feature.
1. Follow the instructions in Before Working Inside Your
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display panel (see
7. Remove the two M2 x 3-mm screws that attach the camera to the display back cover.
8. Detach the camera cable from the display back cover by lifting the tape that secures it to the cover.
1 tape
2 M2 x 3-mm screws (2)
Replacing the Camera
1. With the camera lens facing up, insert the tab at the top-left of the camera into the detent at the bottom-left edge of the camera bezel.
Computer.
Removing the Hinge Cover).
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
3 camera
4 display back cover
Before Working Inside Your Computer) before working inside the